![]() ![]() Using in on uneven ground can cause the sensors to malfunction. Make sure the unit is on a flat, firm surface.Other oils, perfumes, and chemicals can damage the unit and stop it from working. Never put anything else in the diffuser as a trial. Only use essential oils from reputable brands.Don’t move it while it’s full of water and working either. Never overfill the diffuser, this can cause some serious problems with your unit.Always fill your unit up with water and oil before turning it on.Never try to use a third-party adapter as this can cause a power surge and blow the unit, or potentially cause a fire. Only use the adapter supplied with the diffuser as per the manufacturer.Here are some general tips to maintain your unit. Keeping your diffuser in good working order can reduce the chance of it not working or malfunctioning. Unplug from the mains and plug back in and try again.Empty the diffuser, give it a clean and try again.Check what setting the model has and if you need to toggle through to a different option.My Diffuser Has Lights and Power but Doesn’t Start Check if your model has a different setting for the volume of diffusing and adjust if applicable.Give your unit a clean through with citric acid, carefully following the manufacturer’s guidelines.Try emptying it and refilling it after it’s dried out. Check the diffuser has enough water in.Just be sure you’re not still in your warranty period and aren’t entitled to a replacement device before taking it apart!Ĭlick here to buy this Young Living repair kit on eBay ! My Diffuser Is Producing Very Little Mist It comes with instructions and is really straight forward. Diffuser is giving a low water vapor output.ĭon’t worry, you don’t need to be handy with electronics to fit the new part.Diffuser is not working, there are no lights, or the lights flick on and off.You can pick up an exact factory matched ultrasonic element replacement to help with any of the following issues in particular: ![]() Young Living Diffuser Repair Kit – Spare Ultrasonic Element Check you have enough water in the diffuser as there is a safety cut off switch on most models that will cut in if the water is too low.Check the wire going into the diffuser is not loose or has any kinks in it.Check the power adapter you’re using is the right type as per regulations where you live.Try another socket in case there is an issue at this point. Check the plug is securely fitted into the wall socket.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |